Tversity Walkthrough

Today I am going to show you how you can set up a Media Server to stream your music, videos, photos and  playlists via the internet so that you may access your media content anywhere from almost any internet connected device. If you are not familiar with exactly what a Media Server is or how it works don’t fret. Essentially it is just software that allows for your computer to send out content when it is requested to do so. Whenever you click on a youtube video for example, you are requesting that the video be played and the server acknowledges that request and sends you the video which is then played in your browser. This system works the same way. We are going to be using a free software called Tversity to do this along with a few minor configurations to your home network. When configured correctly you will be able to access all of your media content on your PC either from another room in the house streamed to devices you already own like your Xbox360, Playstation3 and even the Wii (assuming these devices are all connected to your wi-fi). Or, if you are on the go you will be able to access your media from a web browser wherever you have an internet connection and even from your iphone! You can check out some of the other Tversity features here: http://tversity.com/download/features. Once we are all set up I will show you some of the other Tversity features like its ability to connect to your Hulu and youTube accounts so that all your videos and favorite shows are consolidated in one place alongside the content you already have.

For a brief overview of all this before you get started check out this link for videos and screenshots:

http://tversity.com/screenshots/

Lets Get Started!

Installation

1. Go to www.tversity.com and click the download button at the top of the screen to get the latest version. Make sure to get the Pro Edition , this is free but you are asked to make a donation if you enjoy using it.

2. Once the download is complete, run the installation.

3. Agree to the terms, and click next until you arrive at the following screen:

4. Make sure all the options are selected, especially the firewall configuration option as this is necessary to get access to your files through the firewall remotely.

5. If you have a youtube and/or hulu account go ahead and enter your login on the next screen and all your content from each service will be added to Tversity when the installation completes.

6. On the next screen go ahead and click finish to complete the installation. Once Tversity starts we will get down to the nitty gritty of configuring this thing.

Add your Media to Tversity

1. Click Library on the top menu.

2. From this screen you can add or remove your media folders that exist on your PC to Tversity so that they can be accessed by your devices or from the web. I created a folder for My music, one for My Pictures, and one for My Videos. You can do this by clicking the Add Item top right menu and clicking browse… to search for the folder you want to add.

3. Next we want our menu to look just like it does in our file system so click on the Media Library icon on the left side of the screen and under Media Library Menus select File System. Your will now be navigated the same way it would be as if you were using windows.

4. Up to this point, your media should now be accessible from your devices at home and Tversity should be automatically detected on your Xbox 360, your Playstation 3, and your Wii. For more information on configuring Tversity for these devices if you are having trouble go here: http://tversity.com/support/

Tversity Configuration for Web Access

Before we begin you, should click on the Settings menu option at the top, this is where we will do most of our setup so that we have access to our media remotely and from all our desired devices. You should now see a screen like this:

1. Our first option is to select a Media Playback Device, we will leave this as Auto Detect so that no matter what device we are trying to connect with, Tversity will stay compatible. You can see in the dropdown the list of devices that work with this service is quite extensive.

2. The next option, Media Sharing is basically what turns Tversity on or off.  This should read “Tversity Media Server is running” in order for your files to be accessible.

3. The Temporary Media Files option can keep its default value of 8192 MB for now.

4. This last option, Home Network is very important for getting this up and running. To do this we will need to follow the guide below:

Set up a static IP address for your computer

This is necessary to uniquely identify your computer from other internet devices in your home. See the videos at the end of this article and visit the links for more information on how to do this correctly in either Vista or Windows XP. Once you have completed this you should now  know what IP number can be used to connect to your computer. Now we just need to know how to connect to your home network , to do that we need to get your home network IP address.

If you are lost at this point think of it this way, your home network IP is like the phone number you would use to call a business. That business may have a lot of people working for it just like you might have a lot of internet devices in your home. Each individual in this business has his or her own extension number that can be used after you dialed in to the business to reach a specific individual, the same goes for connecting to your home network to access a specific device. That extension is basically the same thing as your static IP address.

When I finished this I set my Static IP Address to 192.168.1.50 , you may have specified something else but I recommend using the same as I did.

Now, back to the Home Network option in the Tversity settings panel, enter your Static IP number into the IP address box, leave the Port number as the default value of 41952 and check the box below, assign a username and password and click SAVE.

5. Now we need to configure our router to forward all requests to use Tversity to our computer, so please note the Port number from the previous step as this will basically say, any requests to use Tversity will connect to the computer with IP address {your IP static IP here} when port 41952 is specified, this will become clearer in the next steps.

6. In your browser window type 192.168.1.1 (this is the IP of your home router), you will be prompted for a username and password. If you never specified a username or password when you originally set up your router it will be the default of something like username: admin password: password. The default login information is usually on the bottom of the router. The following screen will differ depending on whether or not you are using a linksys router, a netgear router, etc… Somewhere in the menu there should be an option titled Port Forwarding.

When you click this option you should see a screen that looks something like the following, you will need to enter the port number for the service “Tversity” and specify your Static IP address 192.168.1.1 we set earlier:

for more information on port forwarding if you are having trouble please visit this site: http://portforward.com/

Secondly, not all routers have this setting but some do. If you see a WAN Setup option, click it and if there is an option titled Respond to Ping on Internet Port select it. WAN stands for Wide Area Network, by enabling this you are basically saying the following: “if you want devices to be able to connect to this router from the internet remotely (WAN), and you have services like Tversity set up with an assigned port number, enable connections”.

Assigning a Web Address to your PC

1. The last thing we need to do is create a friendly web address so that we can connect to our home network. To begin open your browser and go to www.dyndns.com and create an account, once set up correctly this service will allow us to enter something like www.BriansMedia.dyndns.tv into the browser instead of 192.151.12.45 to connect to our home network which is harder to remember. This service basically automatically detects the IP of your home network and assigns it to a website address you specify as seen above.

2. Once you have an account login and do the following:

a) click Services on the top menu.

b) on the following screen click the Dynamic DNS option under Domain Services

c) next select Dynamic DNS Free and when that page opens click the Get Started button on the right hand side.

d) Follow the instructions, chose a hostname (I chose myMedia.dyndns.tv), for the service type  select Host with IP address and lastly click the Use auto detected IP address to determine your home network IP and assign that to your Hostname you specified. When finished it should look something like this:

3. Now that we have finished this step, we should be all set! You should now be able to open your browser and enter your Hostname followed by the port number we specified in step 4 that tells us what computer has been assigned requests originating from that port. Just enter your web address you created earlier (http://Mymedia.dyndns.tv:41952)

Your can now navigate through your pictures, music and video and play or view all of these files from your internet browser!

Alternatively you can also access the iPhone interface by adding /iphone at the end when viewing in your iPhones browser (http://myMedia.dyndns.tv:41952/iphone)

Setting a Static IP in Vista

Setting a Static IP in Windows XP

Related posts:

1. Forget Personal Trainers, Let Your Digital Device Tell you What To Do As devices have become increasingly smaller over time it...

Related posts brought to you by Yet Another Related Posts Plugin.